PE340G2QI71  PXE enable




************ Linux tool ****************************


For Linux_x64  use the files under Linux_x64 directory
For Linux_x32  use the files under Linux_x32 directory

Install the product on the system
Run /driver/install
Run bootutil64e or bootutil32e based on the Linux system that you are using.
A screen with a list of the installed cards will appear.
The PE340G2QI71  will be identified as a dual port NIC with   Mac address starts with 00E0ED
Use the numbers on the left column of the relevant NIC as input for the next command


1.Copy the the BootIMG.FLB  file on the same directory of the bootutil  software  
2.bootutilXXe  /nic=X /up=pxe            Flash enable


**********************************************************




********************DOS tool ******************************


Boot the system with DOS OS
run the bootutil
A screen with a list of the installed cards will appear.
The Silicom card  will be identified as card with mac address 00E0ED
Use the numbers on the right column of the relevant NIC as input for below commands (instead of the X below) :

1.Copy the the BootIMG.FLB  file on the same directory of the bootutil  software
2.	bootutil /nic=X /up=pxe            Flash enable




****************************************************************
